Noam
New Member
Offline
Posts: 1
|
I see very strange behavior of Spectre simulator and I hope I could get some help.
I am simulating switched capacitor circuit and I get different results as a function of the simulation length (transient analysis). For example, when the simulation stop time is 100ns I see different wave shapes (between 0 to 100ns) comparing to the exact same simulation when it runs for 400ns (again looking in the range of 0-100ns).
I ran it under moderate accuracy, tried to change to conservative with no change, try to reduce the maxstep (by several orders of magnitude) and no change. Does anyone saw such behavior? Is there any other parameter which depends on the simulation length (besides maxstep)?
Thanks.
|