The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> Analog Design >> Reference for chopping and DEM https://designers-guide.org/forum/YaBB.pl?num=1221547332 Message started by jiesteve on Sep 15th, 2008, 11:42pm |
Title: Reference for chopping and DEM Post by jiesteve on Sep 15th, 2008, 11:42pm Could somebody suggest some good references for chopping and DEM? Thanks in advance. |
Title: Re: Reference for chopping and DEM Post by Berti on Sep 17th, 2008, 1:28am DEM for Delta-Sigma modulators? Take a look at: Yves Geerts et al., Design of Multi-Bit Delta-Sigma A/D Converters, Kluwer. Cheers |
Title: Re: Reference for chopping and DEM Post by wave on Sep 18th, 2008, 12:49pm Kofi Makinwa at Univ. of Delft has done some interesting work in precision Temperature sensors. |
Title: Re: Reference for chopping and DEM Post by thechopper on Sep 18th, 2008, 6:11pm Hi, The basics for chopper amplifiers you can find them in "Circuit techniques for reducing the opamp imperfections" C. Enz. Proceedings of the IEEE, VOL.84 No 11, Novemember 1996 This should be your starting point. Tosei |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |