The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Measurements >> Phase Noise and Jitter Measurements >> Residual FM https://designers-guide.org/forum/YaBB.pl?num=1225391684 Message started by Zero on Oct 30th, 2008, 11:34am |
Title: Residual FM Post by Zero on Oct 30th, 2008, 11:34am What is the definition of the "Residual FM" noise ? And how it is measured ? Thanks. |
Title: Re: Residual FM Post by SSA@A on May 6th, 2010, 9:50pm >What is the definition of the "Residual FM" noise ? FYI. http://cp.literature.agilent.com/litweb/pdf/genesys200801/syn/pll_concepts/noise/fmpm.htm >And how it is measured ? Use the signal source analyzer. Residual FM is calculated from the phase noise trace. the equation is available on the part of “Confirming Integral Phase Noise, Jitter and Residual FM“ in the following on-line manual. http://ssa.tm.agilent.com/e5052b/manuals/webhelp/eng/measurement/phase_noise_measurement/confirming_result_of_phase_noise_measurement.htm |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |