The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> Analog Design >> Commerically Available Hogge Phase Detectors https://designers-guide.org/forum/YaBB.pl?num=1261085640 Message started by bhavuli on Dec 17th, 2009, 1:34pm |
Title: Commerically Available Hogge Phase Detectors Post by bhavuli on Dec 17th, 2009, 1:34pm Hi Folks, I was wondering if you would be knowing of a companies that sell hogge phase detectors. Your help in this regard will be appreciated. Best wishes, bhavuli |
Title: Re: Commerically Available Hogge Phase Detectors Post by Mayank on Dec 17th, 2009, 8:54pm Hi, If i am not wrong, it's mostly used in CDR circuits right ?? Check with RAMBUS, but i think they probably sell the complete IP of a CDR ckt rather than individual component IPs. -- Mayank. |
Title: Re: Commerically Available Hogge Phase Detectors Post by raja.cedt on Dec 17th, 2009, 9:17pm hi, rambus do compltely digital CDR, so you don't see this kind of detector. Now a dys it's hard to found that ckt. Why you want only that cell. Thanks, rajasekhar. |
Title: Re: Commerically Available Hogge Phase Detectors Post by bhavuli on Dec 18th, 2009, 5:18am Thanks Mayank and Rajasekhar. Yes, I am building a CDR circuit with a different approach; my circuit in addition to hogge phase detectors, makes use of ADCs, comparators, and so on. I have purchased the other chips from a company called "Analog Devices". All I have to do is put them all together on a PCB. However, I am still trying to find a hogge phase detector or any other phase detector either digital or analog, so I don't need to spin out chip for just this. Please help folks! Best regards, bhavuli |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |