The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> RF Design >> asynchronous detector for RF signal https://designers-guide.org/forum/YaBB.pl?num=1058015912 Message started by anne on Jul 12th, 2003, 6:18am |
Title: asynchronous detector for RF signal Post by anne on Jul 12th, 2003, 6:18am In addition to the original information signal, the output of an asynchronous demodulator may contain a number of interfering and unwanted components. What actually causes the interfering and unwanted components and what can be done to minimise their affects ??? |
Title: Re: asynchronous detector for RF signal Post by Robert Tso on Oct 21st, 2003, 9:51am a mixer will produce sum and difference products, and the harmonics of the LO will also mix and generate "undesired" mixing products. Filtering is what you can do to minimize their magnitudes and their impact. Frequency planning is part of the game. ;) |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |