The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Measurements >> Other Measurements >> How to measure the DNL/INL in an ADC?
https://designers-guide.org/forum/YaBB.pl?num=1219907559

Message started by Monkeybad on Aug 28^th, 2008, 12:12am

Title: How to measure the DNL/INL in an ADC?
Post by Monkeybad on Aug 28^th, 2008, 12:12am

Hi! everyone!
I want to measure the DNL/INL of a 8bit 8k/s sar-ADC. Can anyone tell me how to do that?
What instruments should I need?
Thanks!

Title: Re: How to measure the DNL/INL in an ADC?
Post by Frank Wiedmann on Aug 28^th, 2008, 5:30am

See lecture 19 of the EE315B course reader from Stanford, available at http://eeclass.stanford.edu/ee315b/ (select "HANDOUTS" in the left column).

Title: Re: How to measure the DNL/INL in an ADC?
Post by Jacki on Apr 9^th, 2014, 3:51pm

Hi Frank,

There is no handout. Where do you find it?
Thank you.

Title: Re: How to measure the DNL/INL in an ADC?
Post by Frank Wiedmann on Apr 10^th, 2014, 12:49am

The handout was there in 2008, things have changed since then. With Google, I found https://coursework.stanford.edu/access/content/group/F13-EE-315B-01/ee315b_reader_2013.pdf, the explanation of DNL/INL measurement starts on page 46 of the pdf file.