The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Other CAD Tools >> Entry Tools >> Importing a Spice model with VSWITCH in Cadence Spectre
https://designers-guide.org/forum/YaBB.pl?num=1313501286

Message started by Sux on Aug 16th, 2011, 6:28am

Title: Importing a Spice model with VSWITCH in Cadence Spectre
Post by Sux on Aug 16th, 2011, 6:28am

Hello everyone.
I am trying to include the ZVN2106G Spice Model in Cadence Spectre. In the model are 4 voltage contolled switches. These voltage contolled switches causes error messages when I try to simulate the ZVN2106G Spice Model in Spectre. The simulation log file is shown in the attachment. The procedure I used was already published in

http://www.designers-guide.org/Forum/YaBB.pl?num=1191334088

by Frank Wiedmann. With this method I have already successful implemented Spice subcircuits in Spectre. But they didnīt have voltage contolled switches. Does anyone know in which way I can adapt the ZVN2106G Spice model to make it compatible with Spectre ?

Thanks !

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.