The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Measurements >> RF Measurements >> Wide Band BALUN (50MHz to 3GHz) https://designers-guide.org/forum/YaBB.pl?num=1326293791 Message started by Ricky Chen on Jan 11th, 2012, 6:56am |
Title: Wide Band BALUN (50MHz to 3GHz) Post by Ricky Chen on Jan 11th, 2012, 6:56am Dear All, I am looking for wideband 50MHz - 3GHz balun Module for measuring the Test chip. ( Multi-Band multiple baluns can still be OK ). The chip is a full receiver. The input to the LNA is fully differntial ( 50-Ohm i/p differential impedance) but my VNA and other measuring equipments are single-ended. I am going to measure by Wafer probing NOT on PCB. So I need balun which will convert the measuring instruments single-ended signal to differential and give it to the PROBE which is connected to DUT (Test Chip) . Can anybody suggest some wid-band baluns ( with good Balance ) available ? |
Title: Re: Wide Band BALUN (50MHz to 3GHz) Post by ywguo on Jun 16th, 2012, 6:36am I don't know what interface you need. But mini-circuits produces a lot of good baluns. Yawei |
Title: Re: Wide Band BALUN (50MHz to 3GHz) Post by biff44 on Jul 8th, 2012, 2:05pm Marki and Picosecond Pulse labs both produce good connectorized baluns. They have excellent 180 deg phase tracking, good gain tracking, and fair return loss. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |