The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Other CAD Tools >> Entry Tools >> Cannot import "Spectre" netlist
https://designers-guide.org/forum/YaBB.pl?num=1400683106

Message started by Pavel on May 21st, 2014, 7:38am

Title: Cannot import "Spectre" netlist
Post by Pavel on May 21st, 2014, 7:38am

Hello,

I've met problems while importing "spectre" netlist.
Here is extract from spiceIn.log:

Code:
********
Created MyLib1.One_Well_1:netlist_tmp
     Created net T1CN_1.
     Created term T1CN_1.
     Created net min1CN_1.
     Created term min1CN_1.
     Created net T1CP.
     Created term T1CP.
     Created net min1CP.
     Created term min1CP.

     Total number of Insts: 265.

     Inst: Irh_1
           Created net '1_1'.
           Created net '2_1'.
           Created net 'm1_1'.
           Created net 'm2_1'.

           Master Cell: 'epfl_res_v2'.
           SpiceIn failed to the to open CDF SimInfo of cell 'ATOMICS1.epfl_res_v2'
           Did not find MyLib1.epfl_res_v2:sch1.
ERROR (SPICEIN-24): Spice In did not find the symbol view of the master cell 'epfl_res_v2' of the instance
'Irh_1' in the subcircuit 'One_Well_1'. Specify the reference library that has the symbol
view of the master cell, or use device-mapping to map 'epfl_res_v2' to a different
cell.


2 questions here:
1. What means 1st warning "SpiceIn failed to the to open CDF SimInfo of ... "
2. Schematic sch1 indeed doesn't exist ... I thougth that it must be created during import process

Thanks in advance

Pavel

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.