The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Design Languages >> Verilog-AMS >> Looking for Verilog - A Code for 2^31-1 PBRS Generator
https://designers-guide.org/forum/YaBB.pl?num=1505345171

Message started by repah on Sep 13th, 2017, 4:26pm

Title: Looking for Verilog - A Code for 2^31-1 PBRS Generator
Post by repah on Sep 13th, 2017, 4:26pm

Hello,

I am looking for Verilog - A Code for 2^31-1 PBRS Generator in Cadence.

The Rand Bit Stream only generates, from what I know, a 2^7 sequence.

I set the seed to 512 in order to enable this.

Is it possible to generate 2^31-1 with rand bit stream in the ahdlLib part of Cadence ?

Can anyone advise if I am incorrect ?

Thank you.

Title: Re: Looking for Verilog - A Code for 2^31-1 PBRS Generator
Post by Andrew Beckett on Sep 14th, 2017, 9:49am

Same question answered at https://community.cadence.com/cadence_technology_forums/f/92/t/37740

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.