The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Measurements >> Phase Noise and Jitter Measurements >> phase.vams file for Predicting the Phase Noise and Jitter of PLL, by Ken
https://designers-guide.org/forum/YaBB.pl?num=1574266140

Message started by thewirehead on Nov 20^th, 2019, 8:09am

Title: phase.vams file for Predicting the Phase Noise and Jitter of PLL, by Ken
Post by thewirehead on Nov 20^th, 2019, 8:09am

Hi there,
I haven't found anybody posting this thread before, if someone already did please point me there,

My problem is that,
In the book, Predicting the Phase Noise and Jitter of PLL-Based Frequency Synthesizers by Ken, the code contains a file called phase.vams, {Signal flow discipline definition for phase signals (the nature Angle is defined in disciplines.vams). This definition is assumed to reside in a file named “phase.vams”.}
Is it okay to ask If someone could share that phase.vams file ::) , I went horribly wrong in finding work around for phase noise and jitter analysis.

Thanks..

Title: Re: phase.vams file for Predicting the Phase Noise and Jitter of PLL, by Ken
Post by Ken Kundert on Nov 20^th, 2019, 9:39am

phase.vams is given in Listng 2 on page 12 of Predicting the phase noise and jitter of PLL-based frequency synthesizers.

-Ken

Title: Re: phase.vams file for Predicting the Phase Noise and Jitter of PLL, by Ken
Post by thewirehead on Nov 20^th, 2019, 5:56pm

thank you very much Ken,
I'll work on this.