The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> Importing Models Into LTSPICE
https://designers-guide.org/forum/YaBB.pl?num=1665869087

Message started by MooCow27 on Oct 15^th, 2022, 2:24pm

Title: Importing Models Into LTSPICE
Post by MooCow27 on Oct 15^th, 2022, 2:24pm

I am modeling a transistor in IC-CAP using the spice level 3 simulator. I extracted these parameters and tried importing them as a spice model in LT spice, but the output current is less than half and the curves look different. What am I missing? Thanks

Title: Re: Importing Models Into LTSPICE
Post by Frank Wiedmann on Oct 17^th, 2022, 4:32am

https://groups.io/g/LTspice/ might be a better place for asking this question.

Title: Re: Importing Models Into LTSPICE
Post by mhx on Oct 20^th, 2022, 1:08am

The value for Is should be 164.2e-12. Your curves looks like LEVEL=1 was used, not 3.