rfzingle
New Member
Offline
Posts: 7
|
Most of the RF system budget (eg. Gain,NF,IIP3 etc.) are always given in terms of power since it is a valid analysis for a discrete RF system where power tranfer rules the world.
However for RF-IC design,power transfer is over-ruled by voltage transfer. Is there a proper sytem tool or paper available which does all the receive/transmit chain calculations in terms of voltage ..eg.specify voltage gain,input referred noise voltage and AIIP3 etc and relate them to Power Gain,NF and PIIP3 etc for different impedance levels.
Thanks Vikas
|