Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Sep 27
th
, 2024, 6:48pm
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design
›
RF Design
› One stage LNA with MMIC invert phase?
‹
Previous topic
|
Next topic
›
Pages: 1
One stage LNA with MMIC invert phase? (Read 1801 times)
imett
New Member
Offline
Posts: 3
One stage LNA with MMIC invert phase?
Aug 09
th
, 2007, 7:15am
Hi to everyone,
i'm an unskilled engeneer in RF solution, i've make my first LNA with a MMIC (like avago or HP MSA0886).
The simple LNA have a one stage amplifier but with my lecroy oscilloscope i've see that the signal is inverted, i've make some mistake or it is usual have this invertion?
Mi goal is design a peakdetector for 1GHz, so the simple idea is use an amplifier and a zero bias schottky diode (HSMS285C).
Thanks in advance.
matteo
Back to top
IP Logged
ACWWong
Community Fellow
Offline
Posts: 539
Oxford, UK
Re: One stage LNA with MMIC invert phase?
Reply #1 -
Aug 9
th
, 2007, 8:02am
yes, for a single stage common-source amplifier, you would expect the signal inversion (as the gate voltage increase, the device takes more current, which develops more voltage across the load from Vsupply, so Vout decreases).
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
»» RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.