Designer’s Guide Community

Pages: 1

poles and zeros in complex RC circuit (Read 5103 times)

hchanda Community Member Offline Posts: 33	poles and zeros in complex RC circuit Oct 05^th, 2007, 9:28pm All, How would one intutively find poles and zeros of a complex RC circuit without deriving any mathematical equations? Please let me know. hc
Back to top	hc IP Logged

Stefan Senior Member Offline Posts: 124	Re: poles and zeros in complex RC circuit Reply #1 - Oct 6^th, 2007, 3:45am Simulate ?
Back to top	IP Logged

Frank Wiedmann

Community Fellow

Offline

Posts: 678
Munich, Germany

Re: poles and zeros in complex RC circuit
Reply #2 - Oct 7^th, 2007, 11:48pm

You might want to have a look at chapter 8 "Bandwidth Estimation Techniques" of the book by Thomas H. Lee (see http://www.designers-guide.org/Books/#Lee-2003). Another document that might be of interest for you is chapter 3 "Normal & Inverted Poles & Zeros" of R. David Middlebrook's "Design-Oriented Analysis Rules and Tools" at http://www.rdmiddlebrook.com/D_OA_Rules&Tools/index.asp.

IP Logged

didac

Senior Member

Offline

There's a million
ways to see the
things in life

Posts: 247
manresa,spain

Re: poles and zeros in complex RC circuit
Reply #3 - Oct 8^th, 2007, 1:25am

Hi,
As Frank pointed in Lee's book there is a good chapter about bandwidth estimation techniques(altough you must do some math), for the method of open circuit time constants if you don't have Lee's book here's the following link:http://ocw.mit.edu/NR/rdonlyres/Electrical-Engineering-and-Computer-Science/6-01...
from MIT(after all if I remember well the method was created there).

IP Logged

hchanda Community Member Offline Posts: 33	Re: poles and zeros in complex RC circuit Reply #4 - Oct 8^th, 2007, 5:24pm Thank you all. hc
Back to top	hc IP Logged

Pages: 1

‹ Previous topic | Next topic ›