Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Sep 29
th
, 2024, 2:19pm
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Design
›
Analog Design
› poles and zeros in complex RC circuit
‹
Previous topic
|
Next topic
›
Pages: 1
poles and zeros in complex RC circuit (Read 5099 times)
hchanda
Community Member
Offline
Posts: 33
poles and zeros in complex RC circuit
Oct 05
th
, 2007, 9:28pm
All,
How would one intutively find poles and zeros of a complex RC circuit without deriving any mathematical equations?
Please let me know.
hc
Back to top
hc
IP Logged
Stefan
Senior Member
Offline
Posts: 124
Re: poles and zeros in complex RC circuit
Reply #1 -
Oct 6
th
, 2007, 3:45am
Simulate ?
Back to top
IP Logged
Frank Wiedmann
Community Fellow
Offline
Posts: 678
Munich, Germany
Re: poles and zeros in complex RC circuit
Reply #2 -
Oct 7
th
, 2007, 11:48pm
You might want to have a look at chapter 8 "Bandwidth Estimation Techniques" of the book by Thomas H. Lee (see
http://www.designers-guide.org/Books/#Lee-2003
). Another document that might be of interest for you is chapter 3 "Normal & Inverted Poles & Zeros" of R. David Middlebrook's "Design-Oriented Analysis Rules and Tools" at
http://www.rdmiddlebrook.com/D_OA_Rules&Tools/index.asp
.
Back to top
IP Logged
didac
Senior Member
Offline
There's a million
ways to see the
things in life
Posts: 247
manresa,spain
Re: poles and zeros in complex RC circuit
Reply #3 -
Oct 8
th
, 2007, 1:25am
Hi,
As Frank pointed in Lee's book there is a good chapter about bandwidth estimation techniques(altough you must do some math), for the method of open circuit time constants if you don't have Lee's book here's the following link:
http://ocw.mit.edu/NR/rdonlyres/Electrical-Engineering-and-Computer-Science/6-01...
from MIT(after all if I remember well the method was created there).
Back to top
IP Logged
hchanda
Community Member
Offline
Posts: 33
Re: poles and zeros in complex RC circuit
Reply #4 -
Oct 8
th
, 2007, 5:24pm
Thank you all.
hc
Back to top
hc
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
»» Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.