Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Sep 27
th
, 2024, 4:52am
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Simulators
›
AMS Simulators
› verilog(rtl) code for phase frequency detector
‹
Previous topic
|
Next topic
›
Pages: 1
verilog(rtl) code for phase frequency detector (Read 806 times)
nikki
New Member
Offline
Posts: 2
verilog(rtl) code for phase frequency detector
Feb 07
th
, 2008, 5:21am
can any one please help me wid d verilog coding of phase frequency detector in pll?
Back to top
IP Logged
sheldon
Community Fellow
Offline
Posts: 751
Re: verilog(rtl) code for phase frequency detector
Reply #1 -
Feb 8
th
, 2008, 3:08am
Nikki,
Any reason to implement the PFD in RTL? Wouldn't it be easier to do
at the gate level? You should be able to implement a gate level version
directly from most block diagrams/schematics.
Best Regards,
Sheldon
Back to top
IP Logged
nikki
New Member
Offline
Posts: 2
Re: verilog(rtl) code for phase frequency detector
Reply #2 -
Feb 8
th
, 2008, 4:20am
yes it would be easy to do the top level simulation but for a documentation purpose the requirement is as such i implement it using rtl code.
rtl code for pfd and divider both
if u cud help....
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
- Circuit Simulators
- RF Simulators
»» AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.