The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 16th, 2024, 9:45am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › General › Tech Talk › Replacing Silicon - with something better?
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Replacing Silicon - with something better? (Read 2121 times)
loose-electron
Senior Fellow
******
Offline

Best Design Tool =
Capable Designers

Posts: 1638
San Diego California
Replacing Silicon - with something better?
May 15th, 2008, 12:22pm  
http://technology.newscientist.com/channel/tech/dn13730-atomthick-material-runs-...

Above is an interesting read. CMOS silicon is reaching the limits of physics, and a breakthru is needed.

-- Jerry
Back to top
 
 
Jerry Twomey
www.effectiveelectrons.com
Read My Electronic Design Column Here
Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.