The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Sep 29th, 2024, 4:17am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › the input signal of RSSI design
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
the input signal of RSSI design (Read 1209 times)
yixiusky
Community Member
***
Offline



Posts: 39
the input signal of RSSI design
Oct 17th, 2008, 5:54am  
Hello everyone ^^

when the input power is -53dBm for my RSSI, the input signal from port looks like distortion. For other input power level, it looks ok. I could not find the reason.

Thank you very much for helping me^^
Back to top
 
 
View Profile yixiusky   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.