Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Apr 23^rd, 2024, 1:46pm

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Design › High-Speed I/O Design › Clock Accuracy and Multiplication

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Clock Accuracy and Multiplication (Read 3582 times)

gavin New Member Offline Posts: 7 Canada	Clock Accuracy and Multiplication Jul 22^nd, 2010, 7:51am Hello: If I have a 25M oscillator with an accuracy of 1PPM and I feed it into a PLL clock multiplier (x5) to generate an 125M signal, what will be the accuarcy of the 125M signal? Thanks, Gavin
Back to top	IP Logged

ACWWong Community Fellow Offline Posts: 539 Oxford, UK	Re: Clock Accuracy and Multiplication Reply #1 - Jul 22^nd, 2010, 10:55am assuming the PLL is doing its job properly, it should be 1ppm on 125M.
Back to top	IP Logged

gavin New Member Offline Posts: 7 Canada	Re: Clock Accuracy and Multiplication Reply #2 - Jul 23^rd, 2010, 9:38am Thanks! -Gavin
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.