The Designer's Guide Community
Forum
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Aug 14th, 2022, 2:47am
Pages: 1
Send Topic Print
Importing a Spice model with VSWITCH in Cadence Spectre (Read 3079 times)
Sux
New Member
*
Offline



Posts: 1

Importing a Spice model with VSWITCH in Cadence Spectre
Aug 16th, 2011, 6:28am
 
Hello everyone.
I am trying to include the ZVN2106G Spice Model in Cadence Spectre. In the model are 4 voltage contolled switches. These voltage contolled switches causes error messages when I try to simulate the ZVN2106G Spice Model in Spectre. The simulation log file is shown in the attachment. The procedure I used was already published in

http://www.designers-guide.org/Forum/YaBB.pl?num=1191334088

by Frank Wiedmann. With this method I have already successful implemented Spice subcircuits in Spectre. But they didnīt have voltage contolled switches. Does anyone know in which way I can adapt the ZVN2106G Spice model to make it compatible with Spectre ?

Thanks !
Back to top
 

ZVN2106G_ErrorReport.JPG
View Profile   IP Logged
Pages: 1
Send Topic Print
Copyright 2002-2022 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.