The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Sep 26th, 2024, 8:45pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › The trigger circuit in BJT-based power clamp
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
The trigger circuit in BJT-based power clamp (Read 1089 times)
Yutao Liu
Community Member
***
Offline



Posts: 76
Guangzhou, China
The trigger circuit in BJT-based power clamp
Dec 19th, 2012, 5:26am  
Dear all,
   I saw in some books that the forward-biased p+/n well diode and reversed-biased Zener diode can be used as the trigger circuit in BJT-based power clamp. Why not a reversed-biased p+/n well diode?

Thanks!

Yutao Liu
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.