The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Sep 18th, 2024, 5:09am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Other CAD Tools › Physical Verification, Extraction and Analysis › plotting node waveform from layout
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
plotting node waveform from layout (Read 3237 times)
VNF
New Member
*
Offline



Posts: 8
plotting node waveform from layout
Mar 07th, 2013, 2:45am  
Hi,

could someone show me what's the most convenient  way to plot (any) node waveform in a Calibre extracted layout?  

thanks a lot
Steve
Back to top
 
 
View Profile   IP Logged
pazhasi
New Member
*
Offline



Posts: 3
Re: plotting node waveform from layout
Reply #1 - Jul 5th, 2016, 3:08am  
Well. if you save the desired node (which you need to find out from the extracted layout) then you can plot similar to the schematic
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.