The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 23rd, 2024, 5:34am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Other CAD Tools › Physical Verification, Extraction and Analysis › LVS error: bad component sub type
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
LVS error: bad component sub type (Read 2075 times)
mixed_signal
Senior Member
****
Offline



Posts: 183
LVS error: bad component sub type
May 11th, 2013, 12:24pm  
Hi,
When i use component havar in cmrf8sf ibm130 technology then i get an error called bad component sub type
D(havar) DDo(net1)

When i checked the .src.net and .sp file then the instances have different order of parameters. How do i fix it?
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.