The Designer's Guide Community
Forum
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 24th, 2019, 8:57am
Pages: 1
Send Topic Print
Control signal circuits for shift register measurement. (Read 4704 times)
Jacki
Senior Member
****
Offline



Posts: 213

Control signal circuits for shift register measurement.
Oct 21st, 2013, 1:45am
 
Hello,

   I am designing a PCB board for my chip now. Since I have a shift register inside the chip, I have to consider how to input the signals from the PCB board to the shift register. Should I use a labview, or are there any circuits I should add on the PCB board? Do I need to make an additional small board to control the shift register? I am not familiar with this part, any comments are appreciated.

   Jacki.
Back to top
 
 
View Profile   IP Logged
Jacki
Senior Member
****
Offline



Posts: 213

Re: Control signal circuits for shift register measurement.
Reply #1 - Nov 20th, 2013, 5:56am
 
Hello,

   I wonder if I can use pattern generator to generate both the clock and data for my shift register.

  Thanks.
  Jacki.
Back to top
 
 
View Profile   IP Logged
Jacki
Senior Member
****
Offline



Posts: 213

Re: Control signal circuits for shift register measurement.
Reply #2 - Dec 11th, 2013, 4:32am
 
Now I am using a MCU to generate the control signals. I don't think pattern generator can work for a shift register with many bits.
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
Copyright 2002-2019 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.