The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 20th, 2024, 7:31am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Modeling › Semiconductor Devices › how to give different mobility models in different regions in atlas
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
how to give different mobility models in different regions in atlas (Read 2617 times)
biju4u90
Junior Member
**
Offline



Posts: 10
how to give different mobility models in different regions in atlas
Mar 19th, 2014, 6:07am  
can i apply different mobility models in different regions of a device in atlas tool?? if it is possible, how it can be given??
Back to top
 
 
View Profile   IP Logged
Jerus
New Member
*
Offline



Posts: 2
Re: how to give different mobility models in different regions in atlas
Reply #1 - Apr 15th, 2014, 7:52am  
Hello,

I think you just have to write

"model region=n (and the mobility's model)"*

*Section 5.5.2 Defining Materials and Models from Atlas user's guide.
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.