The Designer's Guide Community
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Dec 4th, 2023, 10:16pm
Pages: 1
Send Topic Print
TCAD Sentaurus - incomplete ionization (Read 2369 times)
New Member

Posts: 1

TCAD Sentaurus - incomplete ionization
Sep 12th, 2014, 8:30am
I'm trying to simulate a pDBR structure of AlGaAs with the incomplete ionization model activated. While activating the model itself affects the simulation result and I see the doping concentration and IV curve affected, changing the model parameters ("Ionization") of the AlGaAs materials seems not to be taken into account. I made sure that in the log file the standard values (called "Shallow Trap") are actually replaced by the values I provide, but still they have no effect whatsoever on the result. I'm suspecting the model all together is faulty in Sentaurus. any ideas?
Back to top
View Profile   IP Logged
Pages: 1
Send Topic Print
Copyright 2002-2023 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to Consider submitting a paper or model.