The Designer's Guide Community
Forum
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Mar 29th, 2024, 8:12am
Pages: 1
Send Topic Print
High Voltage NMOS in AMS h35 process (Read 1975 times)
preethip
New Member
*
Offline



Posts: 2

High Voltage NMOS in AMS h35 process
Sep 24th, 2015, 12:53pm
 
Hi all,
I am using the high voltage NMOS (nmosi120m) from the ams h35 process in my circuit. i am currently doing the layout. I was not sure about the connections to the RPTUB isolation around the DNTUB of this NMOS. Also, the ams document says that I should connect the source and bulk together using metal1. But when I do LVS, I get an error that says vdd is shorted with another net. But I have made exactly the same connections as in my schematic. I was wondering that I could making some silly blunder with respect to connections to the high voltage NMOS. Has anybody worked with this design kit and in particular , the high voltage NMOS from this PDK before?
Any help will be appreciated.
thanks
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.