The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 18th, 2024, 6:36am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Other CAD Tools › Physical Verification, Extraction and Analysis › PIN order in extracted netlist from Calibre PEX
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
PIN order in extracted netlist from Calibre PEX (Read 2176 times)
SATurn
Community Member
***
Offline



Posts: 53
PIN order in extracted netlist from Calibre PEX
Dec 09th, 2015, 1:06pm  
Problem:
How to ask Calibre Pex to produce extracted netlist with proper pin order to be used directly by spectre

Condition:
I am using command line Calibre to extract netlist from GDS.


I'll appreciate your help.

SATurn
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.