Designer’s Guide Community

‹ Previous topic | Next topic ›

Pages: 1

Broadband Circuit Transmission Line Modeling in Spectre (Read 1742 times)

repah

Community Member

Offline

Posts: 68

Broadband Circuit Transmission Line Modeling in Spectre
Sep 09^th, 2018, 6:39pm

Hello,

I am designing broadband circuits in Cadence Virtuoso/Spectre and modeling the transmission lines in an EM solver and importing the S Parameters.

My circuits are broadband over - say 0-40 GHz.

My question - can I use the S Parameters from the EM solver (touchstone) using an n port in Virtuoso/Spectre and run transient analysis in Cadence Virtuoso/Spectre to see - say eye diagrams ?

What issues will I face ? Can I use the n port for transient analysis ?

Thank you.

IP Logged

deba Community Member Offline Posts: 84	Re: Broadband Circuit Transmission Line Modeling in �Spectre Reply #1 - Sep 14^th, 2018, 6:26am Hi, Yes you can use n-port for transient analysis. Look out for interpolation methods, rational order etc. Last I heard there is a new method called BBSPICE(broad band spice) available for interpolation.
Back to top	IP Logged

Frank Wiedmann Community Fellow Offline Posts: 677 Munich, Germany	Re: Broadband Circuit Transmission Line Modeling in �Spectre Reply #2 - Sep 17^th, 2018, 2:27am Take a look at https://support.cadence.com/wps/mypoc/cos?uri=deeplinkmin:ViewSolution;solutionN.... In most cases, the BBSPICE method works best.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›