Forum
Forum
Verilog-AMS
Analysis
Modeling
Design
Theory
Welcome, Guest. Please
Login
or
Register.
Please follow the Forum
guidelines
.
Oct 2
nd
, 2024, 5:22pm
Home
Help
Search
Login
Register
PM to admin
The Designer's Guide Community Forum
›
Simulators
›
Circuit Simulators
› how to simulate the pole zero
‹
Previous topic
|
Next topic
›
Pages: 1
how to simulate the pole zero (Read 2353 times)
stm2006
New Member
Offline
Posts: 2
chian
how to simulate the pole zero
Apr 10
th
, 2007, 8:15pm
I want to check the pole zero of opamp using pole zero analysis spectre simulator,there are a lot of pole zero summary in the simulation result. how to analysis the result?thanks.
Back to top
I love this game.
IP Logged
chase.ng
Community Member
Offline
Posts: 77
penang/malaysia
Re: how to simulate the pole zero
Reply #1 -
Apr 10
th
, 2007, 8:43pm
Hi,
Most of the poles and zeros are at very high frequency, you will need to filter them out. There is option in the direct plot form.
Regards,
chase
Back to top
Chase
IP Logged
stm2006
New Member
Offline
Posts: 2
chian
Re: how to simulate the pole zero
Reply #2 -
Apr 11
th
, 2007, 6:33pm
it is ture,there are manyparasitical poles in plot,but how can i get what i want.
Back to top
I love this game.
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent Posts
» 10 most recent Topics
Design
- RF Design
- Analog Design
- Mixed-Signal Design
- High-Speed I/O Design
- High-Power Design
- Mixed-Technology Design
Analog Verification
- Analog Functional Verification
- Analog Performance Verification
Measurements
- RF Measurements
- Phase Noise and Jitter Measurements
- Other Measurements
Modeling
- Semiconductor Devices
- Passive Devices
- Behavioral Models
- Transmission Lines and Other Distributed Devices
Design Languages
- Verilog-AMS
- VHDL-AMS
Simulators
»» Circuit Simulators
- RF Simulators
- AMS Simulators
- Timing Simulators
- System Simulators
- Logic Simulators
Other CAD Tools
- Entry Tools
- Physical Verification, Extraction and Analysis
- Unmet Needs in Analog CAD
General
- Tech Talk
- News
- Comments and Suggestions
- Opportunities
« Home
‹ Board
The Designer's Guide Community Forum
» Powered by
YaBB 2.2.2
!
YaBB
© 2000-2008. All Rights Reserved.
Copyright 2002-2024
Designer’s Guide Consulting, Inc.
Designer’s Guide
® is a registered trademark of
Designer’s Guide Consulting, Inc.
All rights reserved.
Send comments or questions to
editor@designers-guide.org
. Consider
submitting
a paper or model.