The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design Languages >> Verilog-AMS >> Information about JitterSim https://designers-guide.org/forum/YaBB.pl?num=1049813241 Message started by saurabh on Apr 8th, 2003, 7:47am |
Title: Information about JitterSim Post by saurabh on Apr 8th, 2003, 7:47am Hi! There is a function in verilogA called JitterSim that, I think, is used to find the jitter in a given circuit. Where do I need to look in to find more information about this function? I looked into the openbook and tried 'spectre -help veriloga' but couldn't find anything. (I found the function being used in one of Kundert's paper related to phase noise and jitter simulation.) Please help. Thanks, saurabh |
Title: Re: Information about JitterSim Post by Ken Kundert on Apr 8th, 2003, 3:07pm The name JitterSim in this paper is not some built-in function or capability in either Spectre or Artist. It is simply the name given to a particular transient analysis. Unlike Spice, Spectre is capable of running multiple transient analyses in succession. As such, when using the Spectre native netlist format, you must give each analysis a name so that the results produced by several transient analyses can be distinguished. The names are arbitrary, except they must be unique. When I name my analyses, I try to give them names that are indicative of what they are being used for. The transient analysis in question was being used to predict the jitter performance of the circuit, so I named it JitterSim. But I could have named it anything. -Ken |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |