The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Design >> RF Design >> Jitter and Phase Noise
https://designers-guide.org/forum/YaBB.pl?num=1072257563

Message started by RoiFaust on Dec 24^th, 2003, 1:19am

Title: Jitter and Phase Noise
Post by RoiFaust on Dec 24^th, 2003, 1:19am

Does anyone knows how to get jitter (the RMS will do) of a clock from its phase noise and vice-versa.
Or maybe you are familiar with a good article on the subject.
Thx
Roi ;D

Title: Re: Jitter and Phase Noise
Post by Jitter Man on Dec 24^th, 2003, 9:29am

You can find some of that information in the documents on this website (try Predicting the phase noise and jitter of PLL-based frequency synthesizers in www.designers-guide.com/Analysis. You might also try
David C Lee, Analysis of jitter in phase-locked loops. IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, vol. 49, no. 11, pp. 704-711, November 2002.
[glb]Jitter Man[/glb]