The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> about cadence manual
https://designers-guide.org/forum/YaBB.pl?num=1081260351

Message started by stone on Apr 6^th, 2004, 7:05am

Title: about cadence manual
Post by stone on Apr 6^th, 2004, 7:05am

I have problems in using cadence.
Though I can get help in the cadence software, I want to have a cadence manual before I use the cadence software.
Can anyone have a cadence manual?
Can anyone help me ?

Title: Re: about cadence manual
Post by Andrew Beckett on Apr 6^th, 2004, 10:27am

If using IC446 or later, type "cdsdoc".

If using IC445 or before, type "openbook".

This will start up the documentation system. In cdsdoc it
displays the documentation in web pages, although at the top
of the pages, there is a link to print the manuals or display in PDF
format - these are nicely formatted documents, rather than web
pages - so you can print them out.

There's an enormous number of manuals, so you'll need to find the one you want - a "cadence manual" is rather vague, since there
are many, many different tools that you could be talking about...

Andrew.

Title: Re: about cadence manual
Post by stone on Apr 6^th, 2004, 8:18pm

Hi Andrew!
Thanks for your help!
I want to have a cadence manual about the analog cicuit design. It had better be displayed in PDF format.
Can you help me ?
Thanks!

Stone.

Title: Re: about cadence manual
Post by Andrew Beckett on Apr 7^th, 2004, 12:12am

Did you actually try running cdsdoc/openbook (depending
on the version) and then navigating around the manuals
to find a relevant one? In both documentation systems there
is a search engine too.

It's not hard. Try it before asking...

Andrew.