The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design Languages >> Verilog-AMS >> tiburon-da (verilog -A) https://designers-guide.org/forum/YaBB.pl?num=1096623434 Message started by chris on Oct 1st, 2004, 2:37am |
Title: tiburon-da (verilog -A) Post by chris on Oct 1st, 2004, 2:37am hello all, can anybody describe a little bit about the verilog-A language in tiburon-da compiler? how does it works with ADS simulator and ICCAP ? thanks |
Title: Re: tiburon-da (verilog -A) Post by Marek Mierzwinski on Oct 1st, 2004, 5:13pm The Tiburon-DA compiler supports the LRM2.1 standard (with a few minor exceptions). The compiler generates shared libraries that link to a proprietary interface. This simulator-specific interface has been integrated into several commercial simulators such as Agilent's ADS and RFDE. Verilog-A models are supported in all the analysis types (including HB, circuit envelope, and nonlinear noise). The Verilog-A models have the look and feel of built-in devices. The netlist format is the same, including model card support. Built-in models can be overridden by Verilog-A models of the same name. A compiled approach provides speed comparable to c-coded models with the added advantage of IP protection. The Tiburon-DA product is an integral part of the simulator solution (the compiler works behind the scene without any extra effort by the user). Agilent's parameter extraction program IC-CAP works with ADS and other simulators. Verilog-A support is transparent, users only need to put the Verilog-A source code in a directory in the search path. Marek Mierzwinski |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |