The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> generating spectre netlist from command promt. https://designers-guide.org/forum/YaBB.pl?num=1109004525 Message started by kamesh419 on Feb 21st, 2005, 8:48am |
Title: generating spectre netlist from command promt. Post by kamesh419 on Feb 21st, 2005, 8:48am Dear all, I have a gate level netlist for an 8-bit adder. I used to import it to cadence and i can simulate it through graphical interface and generate the spectre netlist. I would like to how i can generate the spectre netlist from command promt. I later modify the netlist to include sources and simulation commands and simulate the changed netlist from command promt as spectre <file name.scs> (i am interested in automating my stuff). Thanks and Regards, Kamesh. |
Title: Re: generating spectre netlist from command promt. Post by Andrew Beckett on Feb 21st, 2005, 11:50am Put this in a file: Code:
And then do: Code:
Regards, Andrew. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |