The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Other CAD Tools >> Physical Verification, Extraction and Analysis >> Problem in installing Assura in ace446 https://designers-guide.org/forum/YaBB.pl?num=1112039363 Message started by rpaul on Nov 4th, 2004, 11:24am |
Title: Problem in installing Assura in ace446 Post by rpaul on Nov 4th, 2004, 11:24am I am having problem is installing Assura in my ace446. The assura icon is not coming in the Virtuoso Layout Editor Window. Can any one guide me in its installation or can refer me to some sites regarding it. |
Title: Re: Problem in installing Assura in ace446 Post by Andrew Beckett on Nov 4th, 2004, 10:50pm I'm assuming ace is your environment name? It's not a Cadence tool name. What you need to do is: a) Install an Assura version intended for use with IC446 rather than IC50. There are separate builds - you can see this on the http://downloads.cadence.com site b) Make sure that the ASSURAHOME environment variable is set and is pointing to the root of the Assura installation tree. c) Make sure that $ASSURAHOME has the tools link pointing to tools.sun4v (or whatever platform you're using). d) Make sure your UNIX path contains: $ASSURAHOME/tools/assura/bin That should be sufficient. Of course, I don't know whether "ace446" is altering the path or environment variables itself - you'll have to check that. Regards, Andrew. |
Title: Re: Problem in installing Assura in ace446 Post by rpaul on Nov 8th, 2004, 10:59am Thank you Andrew for the suggestions. I |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |