The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Other CAD Tools >> Physical Verification, Extraction and Analysis >> The problem in PDRACULA https://designers-guide.org/forum/YaBB.pl?num=1112039481 Message started by Aigneryu on Feb 7th, 2004, 6:24pm |
Title: The problem in PDRACULA Post by Aigneryu on Feb 7th, 2004, 6:24pm Maybe more and more people begin to use Mentor calibre to perform design verification, but recently I have to use PDRACULA to complete the DRC, LVS, and LPE because the technology does not support the use of calibre or assura. I found some documents about the usage of PDRACULA on Internet, and I can complete the LPE with the output of a parasitic netlist by off-line method. However, I do not know how to import this parasitic information to cadence vituoso environment to make extracted cell view. Even though I can use netlist directly to perform hspice/spectre simulation, I prefer using GUI and hierarchy editor to do so. Can anybody give me a link to some material about the solution of my problem? |
Title: Re: The problem in PDRACULA Post by okguy on Feb 8th, 2004, 7:45am The best training I've ever seen is from CIC-taiwan. But I could find it on their web site. I will check my CDs. OkGuy? |
Title: Re: The problem in PDRACULA Post by okguy on Feb 9th, 2004, 5:19am I found it, if you need it .... post me. ;) |
Title: Re: The problem in PDRACULA Post by ywguo on Feb 29th, 2004, 2:39am Hello, okgur, Could you send me a copy of the training on PDRACULA to me. It would be helpful. Thanks! Yawei Guo My email is y_w_guo@yahoo.com |
Title: Re: The problem in PDRACULA Post by Andrew Beckett on Mar 4th, 2004, 9:17am You could of course read the DRACULA user guide that comes with the software... Andrew. |
Title: Re: The problem in PDRACULA Post by staric on May 23rd, 2004, 4:29am Why you need to import this parasitic information to cadence vituoso after LPE? |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |