The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Measurements >> Phase Noise and Jitter Measurements >> predicting the phase noise and jitter In the https://designers-guide.org/forum/YaBB.pl?num=1116318645 Message started by layes on May 17th, 2005, 1:30am |
Title: predicting the phase noise and jitter In the Post by layes on May 17th, 2005, 1:30am I have read your paper "predicting the phase noise and jitter in PLL" Now I am interesting in the jitter of the Pll output after vco buffer. So I measure the Pll output periods after it is stable and generate the 'periods.m' I did not include FD in the vco. and the parameters I used are: Fout = 480MHz Fin=12MHz N=40 and M=1 > > my question are: > 1.in your matlab code how to choose 'nfft' > 2.Is that Sphi=L in the matlab generate graph. > 3.In the curve that matlab generate ,why we choose 100kHz as the delta(f)? > how should we choose it? > 4.How the resolution bandwidth affect our performance? |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |