The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> pz simulation of differential OTA https://designers-guide.org/forum/YaBB.pl?num=1119275974 Message started by lianming1 on Jun 20th, 2005, 6:59am |
Title: pz simulation of differential OTA Post by lianming1 on Jun 20th, 2005, 6:59am Hi, I am simulating differential cascode OTA with Hspice. I meet one problem when I do .pz simulation. and hspice give me following message in the list file: * project opa_cascode_test_3 ****** pole/zero analysis tnom= 25.000 temp= 25.000 ****** input = 0:vin+ output = v(out+ input = 0:vin+ output = v(out+ **warning** pole analysis stopped - iterno .gt. 100 xreal= 4.52848E-14 ximag= -1.11504E-12 ***** no poles found ***** coeffd = -3.013e-01 **warning** zero analysis stopped - iterno .gt. 100 xreal= 4.12406E-14 ximag= -1.30545E-12 ***** no zeros found ***** coeffn = -8.185e+03 ***** constant factor = -8.185e+03 ***** csdfcntl: error in cio Write funtion csdfcntl: error in cio Write funtion Can you help me? thanks a lot! Best regards! lianming1 |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |