The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Other CAD Tools >> Physical Verification, Extraction and Analysis >> CWS (substrate noise analysis) https://designers-guide.org/forum/YaBB.pl?num=1127420019 Message started by horizon on Sep 22nd, 2005, 1:13pm |
Title: CWS (substrate noise analysis) Post by horizon on Sep 22nd, 2005, 1:13pm Hello, I would like to know if somebody tested the CWS tools. This one is a new tools to extract and quantify the substrate noise. Thank you very much have a nice day Horizon |
Title: Re: CWS (substrate noise analysis) Post by Andrew Beckett on Sep 24th, 2005, 3:23am Do you have a URL for the supplier of these tools? I did some google searching and couldn't find anything relevant (most seemed to be related to Constructed Wetlands - which is obviously nothing to do with this!). I'm interested... Andrew. |
Title: Re: CWS (substrate noise analysis) Post by horizon on Jan 28th, 2006, 3:29pm Hi Andrew, I am sorry for this late answer... CWS means coupling wave solution. I don't have URL , but if you write "cws" and "voiron" you will find article about it Horizon |
Title: Re: CWS (substrate noise analysis) Post by Paul on Jan 29th, 2006, 1:10pm Hi Andrew, hi Horizon, I only found a couple of short links in French, as the company is based in the Grenoble area. I believe this is a new start-up company co-founded by François Clement, who contributed to the developement of Substrate Storm at Simplex (which was later aquired by Cadence, I believe). I don't think they have any tools available yet, I couldn't even find a web site :( Paul |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |