The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> obtain list of nodes from spectre netlist? https://designers-guide.org/forum/YaBB.pl?num=1128575429 Message started by huber on Oct 5th, 2005, 10:10pm |
Title: obtain list of nodes from spectre netlist? Post by huber on Oct 5th, 2005, 10:10pm Hello everyone- I'm trying to do a post-layout parasitic extracion. I want to extract resistance for gnd and vdd and a couple other nodes and just extract capacitance for all other nodes. The problem I'm having is that for this "mixed" extraction I'm required to list all the nets I want extracted. So I need a list of all the nodes in my circuit. Anyone know how to get this? I'm using the cadence analog deisign environment, by the way. Thanks, -Dan |
Title: Re: obtain list of nodes from spectre netlist? Post by Ken Kundert on Oct 5th, 2005, 10:42pm When running from within Artist, Artist directs Spectre to produce a collection of statefiles (something.ic, something.fc, etc.). These statefiles contain a list of all of the nodes and their values. Edit it to eliminate the values. Eliminate any terminals listed in the file by eliminating any line that has a colon in the name. -Ken |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |