The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> how to plot voltage of all the vdd nodes https://designers-guide.org/forum/YaBB.pl?num=1132488001 Message started by river on Nov 20th, 2005, 4:00am |
Title: how to plot voltage of all the vdd nodes Post by river on Nov 20th, 2005, 4:00am I use spectre to do post simulation and I want to check IR drop on vdd net. The vdd net is RC extracted. so there are so many nodes on this net. To plot every node voltage by manually clicking on the av_analog_extracted layout is a terrible job. Any good method to plot all the node voltage? Another question: I want to check electromigration rule. I did post-sim with spectre. Can I get current density information for every metal wire segments and vias? |
Title: Re: how to plot voltage of all the vdd nodes Post by sheldon on Nov 20th, 2005, 8:32am River, Use VAVO, it is the Voltage Storm extensions for Analog designers. It works with the back-annotated simulation flow. You can display the IR drop on the power supply rail. Best Regards, Sheldon |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |