The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> RF Design >> Integrated Mixer & VCO Simulation https://designers-guide.org/forum/YaBB.pl?num=1136216654 Message started by hrkhari on Jan 2nd, 2006, 7:44am |
Title: Integrated Mixer & VCO Simulation Post by hrkhari on Jan 2nd, 2006, 7:44am Hi Guys: I had designed a standalone mixer and VCO topology in Spectre-RF, when I integrated them, I couldn't actually simulate the 1dB compression point, IIP3 point or the Output power spectrum, b'coz there's only one fundamental tone, which is the input tone, whereas the LO tone is generated by the differential VCO. Please do guide me in the simulation process in Spectre-RF. I would also appreciate if any of you could kindly provide me with the documents in the simulation procedure, if there is any.Pls help.....Thanks in advance Rgds |
Title: Re: Integrated Mixer & VCO Simulation Post by sheldon on Jan 2nd, 2006, 8:44am hrkari, Have you tired autonomous envelope following analysis? It is really intended for handling modulated signals, however, it should probably work for a sine wave input. It should be okay for IIP3 and the output power spectrum. Not sure that it supports power sweeps so P1dB maybe difficult, unless you want to generate an AM-modulated signal. BTW, the Virtuoso community website contains the SpectreRF app notes for LNA, Mixer, VCO, and PA simulation. See the following link http://www.cadence.com/community/virtuoso/wireless/tr.aspx?exclude=ams Best Regards, Sheldon |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |