The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> RF Simulators >> pNOISE analysis USING CADENCE spectere
https://designers-guide.org/forum/YaBB.pl?num=1136720253

Message started by rjshmadala on Jan 8^th, 2006, 3:37am

Title: pNOISE analysis USING CADENCE spectere
Post by rjshmadala on Jan 8^th, 2006, 3:37am

Hi Guys,
when i was running pnoise analysis in cadence spctre it saying as below
Internal error found in spctere during p noise analysis please run 'get spectre files' or send the netlist..............
to support@cadence.com
assertion failed in file 'bsim3v3.c'at line 44995
assertion failed.
pss was running correctly
can u guys please solve this issue.
i set the parameters as in cadence manual
http://www.cadence.com/community/virtuoso/resources/SpectreRF_VCO533AN.pdf
but still the error was coming.

Regards
Rjshmadala

Title: Re: pNOISE analysis USING CADENCE spectere
Post by Andrew Beckett on Jan 9^th, 2006, 11:43am

I answered this in http://www.designers-guide.org/Forum/YaBB.pl?num=1136720322. Generally it's not a good idea to post in more than one forum. It tends to lead to confused responses where somebody hasn't seen responses on the other thread.

Regards,

Andrew.

Title: Re: pNOISE analysis USING CADENCE spectere
Post by Forum Administrator on Jan 9^th, 2006, 1:40pm

Please read the Forum guidelines before posting (http://www.designers-guide.org/Forum/guidelines.html).

Thanks,
-Ken