The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Design >> RF Design >> P noise in cadence spectre
https://designers-guide.org/forum/YaBB.pl?num=1136720322

Message started by rjshmadala on Jan 8^th, 2006, 3:38am

Title: P noise in cadence spectre
Post by rjshmadala on Jan 8^th, 2006, 3:38am

Hi Guys,
when i was running pnoise analysis in cadence spctre it saying as below
Internal error found in spctere during p noise analysis please run 'get spectre files' or send the netlist..............
to support@cadence.com
assertion failed in file 'bsim3v3.c'at line 44995
assertion failed.
pss was running correctly
can u guys please solve this issue.
i set the parameters as in cadence manual
http://www.cadence.com/community/virtuoso/resources/SpectreRF_VCO533AN.pdf
but still the error was coming.

Regards
Rjshmadal

Title: Re: P noise in cadence spectre
Post by Andrew Beckett on Jan 9^th, 2006, 10:29am

This looks as if it may be the same as PCR:

PCR: 756235
Title: Assertion failed in file bsim3v3.c during Pnoise

which was fixed in an IC5141 hotfix (and later), in at least 5.10.41.500.0.9. It doesn't look as if the fix was
backported to IC5033. The assertion failure was not on the exact same line, but the code would have changed
between versions anyway... It may not be exactly the same problem though...

Can you try in a more recent version?

Best Regards,

Andrew.