The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Design >> RF Design >> VCO Start Up, Which is the
https://designers-guide.org/forum/YaBB.pl?num=1137948876

Message started by hrkhari on Jan 22^nd, 2006, 9:03am

Title: VCO Start Up, Which is the
Post by hrkhari on Jan 22^nd, 2006, 9:03am

Hi Guys:

I had initially used damped periodic vsin source to initialize the designed pMOS based VCO, the transient response are of satisfactory from 0-1.8V of tuning voltage, but due to its nature of damped periodic, I had difficulities in executing the PSS analysis, I shifted to a pulse source initialization at the Vdd and a pulse current source in parallel to the LC tank, the transient response however is not of satisfactory from 0-1V of tuning voltage. but however there is variation of frequency with respect to the variation of the tuning voltage. Can anyone kindly comment on this?. Thanks in advance

Rgds