The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> How to run the behavioral model in Spectre? https://designers-guide.org/forum/YaBB.pl?num=1140488198 Message started by jdlijj2 on Feb 20th, 2006, 6:16pm |
Title: How to run the behavioral model in Spectre? Post by jdlijj2 on Feb 20th, 2006, 6:16pm Hi, All: I am a beginner in IC design. The behavioral modeling method proposed in ken's "Predicting the Phase Noise and Jitter of PLL-Based Frequency Synthesizers" made me exciting. Repeating the experiment in his paper could speeds up my learning and makes me familiar with the sim flow. 1 Now I have the simulators, Spectre but not SpectreRF. What I need else? 2 Can I simulate the example in the paper just by using the listing 14,15,16 and 18 in the paper without modification. 3 Where and when and how to use listing 17? 4 How about the detail flow? Thanks and best regards! jdlijj2 |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |