The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Modeling >> Semiconductor Devices >> surface-potential model-help
https://designers-guide.org/forum/YaBB.pl?num=1144937877

Message started by hzieexwj on Apr 13^th, 2006, 7:17am

Title: surface-potential model-help
Post by hzieexwj on Apr 13^th, 2006, 7:17am

my teacher give me an assignment to learn sth about sp model.
who can give me some materials about it ?
thank you!

Title: Re: surface-potential model-help
Post by Andrew Beckett on Apr 19^th, 2006, 11:12pm

Look at the Modeling link on the Designer's Guide site (yes, this site): http://www.designers-guide.org/Modeling/ - it has links to information about the PSP model.

Regards,

Andrew.

Title: Re: surface-potential model-help
Post by hzieexwj on Apr 20^th, 2006, 12:30am

i have download the materials through the links on your site.
thank you.

Title: Re: surface-potential model-help
Post by mikki33 on May 18^th, 2006, 4:29am

It was 2 presentation about surface-potential modeling at ICECS-2004
(Intnl. Conf. on Electronics, Circuits and Systems).
If you can't find the proceedings, leave me PM with you e-mail, I'll send you these presentations.

Or look for "Daniel Foty" together with "Gilgamesh Associates" in the Internet

Best,
Michael

Title: Re: surface-potential model-help
Post by Geoffrey_Coram on May 18^th, 2006, 10:09am

I don't believe Foty is actually involved in the development of any of the sp-based models.

I would instead recommend papers by Gildenblat or Klaassen (PSP) or Miura-Mattausch (HiSIM), some of which were presented at the Workshop on Compact Modeling (http://www.ntu.edu.sg/home/exzhou/WCM/)

Title: Re: surface-potential model-help
Post by hzieexwj on May 24^th, 2006, 11:56pm

Thank you all bove!
i have read some papers about psp.
it will take me some time to be familiar with psp.
althou i don't know the key point of psp , i will go on

Title: Re: surface-potential model-help
Post by mikki33 on May 25^th, 2006, 12:32am

Geoffrey,

you are right, Daniel Foty is not involved into the development, but he is SELLING the models and simulations approaches. So, from his presentations it is possible to understand what he is selling. Addition to that he is an interesting guy, and fun to speak with. I enjoyed the presentations and conversation.

Michael

Title: Re: surface-potential model-help
Post by Geoffrey_Coram on May 25^th, 2006, 4:37am

How can he sell a public-domain model (PSP)??

Title: Re: surface-potential model-help
Post by mikki33 on May 25^th, 2006, 4:52am

It's a good question. I nether thought about it...