The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> RF Design >> Please help me to build an FM Rx using TDA7000 https://designers-guide.org/forum/YaBB.pl?num=1145403859 Message started by ahmad_abdulghany on Apr 18th, 2006, 4:44pm |
Title: Please help me to build an FM Rx using TDA7000 Post by ahmad_abdulghany on Apr 18th, 2006, 4:44pm Hi all, I am newbie to this forum, I want you to help me to build a high bit rate Rx using TDA7000.. I could build the Rx as described in its datasheet, but it allow bit rate not higher than 9kbps :'( I want to increase its bit rate.. I think that reason of that low bit rate is due to that last low pass action made by last AF stage, Can I overcome this problem if i added in cascade another HPF with opposite c/cs to the latter LPF? Is there any other modifications that i can made?? Please help me, I am in trouble!!!! And any information will be appreciated.. You can find TDA7000 Datasheet here: http://www.semiconductors.philips.com/acrobat/datasheets/TDA7000_CNV_2.pdf Thanks alot in advance, Ahmad, |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |